Shanghai Zhaomu Industrial Technology Co., Ltd

 

Precision Touch Switches: The Epitome of Contact - Type Sensor Excellence We are proud to present our range of Precision Touch switches, a collection of contact - type sensors that redefine performance and reliability. One of the most remarkable features of our Precision Touch switches is their compact size. Despite their small form factor, they pack a powerful punch, easily integrating into various devices and applications where space is at a premium. This makes them an ideal choice for industries such as electronics, medical equipment, and aerospace. When it comes to accuracy, our Precision Touch switches are in a league of their own. With a repeatability positioning accuracy of 1μ, they can provide consistent and precise measurements time after time. This high level of precision ensures that your operations run smoothly and efficiently, minimizing errors and maximizing productivity. In addition to their precision, our Precision Touch switches are built to last. With a service life of approximately 50 million cycles, they can withstand the rigors of continuous use, reducing the need for frequent replacements and saving you time and money in the long run. Furthermore, our Precision Touch switches come with an IP67 protection rating. This means they are dust - tight and can withstand immersion in water up to a certain depth, making them suitable for use in harsh environments. Whether you are looking for a reliable sensor for your next project or need to upgrade your existing equipment, our Precision Touch switches are the perfect solution. Experience the difference that precision and durability can make with our exceptional contact - type sensors.

 

 

 

Modle：ZTSM6-- Action (blank: OFF→ON B: ON→OFF)-Light(blank: No LED light,LED: LED light)

 

 

Stroke	1.2mm
Operating force	0.3N
Movement until the operation[PT]	0.2～0.5mm
Hysteresis movement[MD]	0.1mm or less
Repeat accuracy	±0.002mm
Cable specifications	ZTSM6 / ZTSM6-LED：φ2.8 3wire, Gray 1m
	ZTSM6(B)/ ZTSM6(B)-LED：φ2.8 3wire, Black 1m
Case,Nut,Shaft material	SUS
Mounting	M6 nut tightening torque 2N･m or less
Mounting hole processing dimensions	φ6 0+0.5
Indicator light	ZTSM6/ZTSM6 (B) : Without indicator light
	ZTSM6-LED/ZTSM6(B)-LED: Approximately 100mm from the main unit
Protective structure	IP67
Curcuit diagram	ZTSM6 / ZTSM6(B)：CNC-3
	ZTSM6-LED / ZTSM6(B)-LED： CNC-18

･Do not apply a force of 30N or more to the contact part.
･By using cable options, conversion of output specifications, current amplification, and cable extension are possible.

 

 

3-wire system

Supply Voltage	DC5～24V
Output specifications	NPN open collector (ON when in proximity)
	If it is OFF in close proximity, (B) is added to the end of the model number
Output current	15mA
Consumption current	8mA
Frequency of operation	60 or less per minute
Voltage Resistance	AC1000V
	(1 minute / packaged charging part / between the case)
Insulation Resistance	DC250V
	(Over 20MΩ in megohms / between the case)
Operation Temperrature Range	－20℃～＋85℃(Without condensation)
Operating Humidity Range	20～95%RH

* By using cable options, conversion of output specifications, current amplification, and cable extension are possible.

・The circuit diagram must be observed to ensure a correct connection. A reverse connection and a short-circuiting output are strictly prohibited.

・When connecting an inductive load such as relay, be sure to use a freewheeling diode. (Some models already include a built-in freewheeling diode.)

・When installing a switch, use the torque value designated for each switch.

・When handling / using the product, do not apply an excessive tension to the cable connection part.

 

 

 

 

 

 

 

 

Modle：ZTSM8-- Action (blank: OFF→ON B: ON→OFF)-Light(blank: No LED light,LED: LED light)

 

 

Stroke	1.5mm
Operating force	0.4N
Movement until the operation[PT]	0.2～0.5mm
Hysteresis movement[MD]	0.1mm or less
Repeat accuracy	±0.001mm
Cable specifications	STM8 / STM8-LED：φ2.8 3wire, Gray 1m
	STM8(B)/ STM8(B)-LED：φ2.8 3wire, Black 1m
Case,Nut,Shaft material	SUS303
Mounting	M8 nut tightening torque 5N･m or less
Mounting hole processing dimensions	φ8 0+0.5
Indicator light	ZTSM8/ZTSM8(B) : Without indicator light
	ZTSM8-LED/ZTSM8(B)-LED : Approximately 100mm from the main unit
Protective structure	IP67
Curcuit diagram	ZTSM8 /ZTSM8(B)：CNC-3
	ZTSM8-LED / ZTSM8(B)-LED：CNC-18

･Do not apply a force of 30N or more to the contact part.
･By using cable options, conversion of output specifications, current amplification, and cable extension are possible.

 

 

4-wire system

Supply Voltage	DC5～24V
Output specifications	NPN open collector (ON when in proximity)
	If it is OFF in close proximity, (B) is added to the end of the model number
Output current	15mA
Consumption current	8mA
Frequency of operation	60 or less per minute
Voltage Resistance	AC1000V
	(1 minute / packaged charging part / between the case)
Insulation Resistance	DC250V
	(Over 20MΩ in megohms / between the case)
Operation Temperrature Range	－20℃～＋85℃(Without condensation)
Operating Humidity Range	20～95%RH

* By using cable options, conversion of output specifications, current amplification, and cable extension are possible.

・The circuit diagram must be observed to ensure a correct connection. A reverse connection and a short-circuiting output are strictly prohibited.

・When connecting an inductive load such as relay, be sure to use a freewheeling diode. (Some models already include a built-in freewheeling diode.)

・When installing a switch, use the torque value designated for each switch.

・When handling / using the product, do not apply an excessive tension to the cable connection part.

 

 

 

 

 

 

 

 

Modle：ZTSM8L-- Action (blank: OFF→ON B: ON→OFF)-Light(blank: No LED light,LED: LED light)

 

 

Stroke	3mm
Operating force	0.7N
Movement until the operation[PT]	0.2～0.5mm
Hysteresis movement[MD]	0.1mm or less
Repeat accuracy	±0.001mm
Cable specifications	ZTSM8L / ZTSM8L -LED：φ2.8 3wire, Gray 1m
	ZTSM8L(B)/ZTSM8L(B)-LED：φ2.8 3wire, Black 1m
Case,Nut,Shaft material	SUS303
Mounting	M8 nut tightening torque 5N･m or less
Mounting hole processing dimensions	φ8 0+0.5
Indicator light	ZTSM8L /ZTSM8L(B) : Without indicator light
	ZTSM8L-LED/ZTSM8L(B)-LED :Approximately 100mm from the main unit
Protective structure	IP67
Curcuit diagram	ZTSM8L / ZTSM8L(B)：CNC-3
	ZTSM8L-LED / ZTSM8L(B)-LED：CNC-18

･Do not apply a force of 30N or more to the contact part.
･By using cable options, conversion of output specifications, current amplification, and cable extension are possible.

 

 

5-wire system

Supply Voltage	DC5～24V
Output specifications	NPN open collector (ON when in proximity)
	If it is OFF in close proximity, (B) is added to the end of the model number
Output current	15mA
Consumption current	8mA
Frequency of operation	60 or less per minute
Voltage Resistance	AC1000V
	(1 minute / packaged charging part / between the case)
Insulation Resistance	DC250V
	(Over 20MΩ in megohms / between the case)
Operation Temperrature Range	－20℃～＋85℃(Without condensation)
Operating Humidity Range	20～95%RH

 

* By using cable options, conversion of output specifications, current amplification, and cable extension are possible.

・The circuit diagram must be observed to ensure a correct connection. A reverse connection and a short-circuiting output are strictly prohibited.

・When connecting an inductive load such as relay, be sure to use a freewheeling diode. (Some models already include a built-in freewheeling diode.)

・When installing a switch, use the torque value designated for each switch.

・When handling / using the product, do not apply an excessive tension to the cable connection part.

 

 

 

 

https://www.sensortechpro.com/